Zcm

Informazioni basilari.

Modello numero.	ZCM-T
Energia	Elettrico
Avviare	Pompa elettrica
Tipo	Pompa a lama
Applicazione	Pompa dell'acqua pulita
Industria	Pompa meccanica
Media	Acqua pulita
Prestazione	Pompa automatica
Teoria	Pompa elettromagnetica
Isolamento	B/F
Tenuta meccanica	NBR/Ceramica/Carbonio
Statore	Laminazione a freddo della lamiera di acciaio al silicio
Reporter	Laminazione a freddo della lamiera di acciaio al silicio
Protezione	IP44
Marca	OEM
Foglio Motore	Foglio di laminazione in silicio freddo
Girante	Ottone/Acciaio inossidabile/PPO
Albero motore	Acciaio inossidabile 45#/304#
Pacchetto di trasporto	Schiuma+Cartone+Pallet
Specifica	Pompa autoadescante automatica
Marchio	GORDONE
Origine	Fu'an Cina

> Pump Body: cast iron & support under special anti-rust treatment>> Impeller: stainless steel impeller, brass impeller, ppo impeller>> Mechnical Seal: carbon / ceramic / Stainless SteelbrMotor>> Bulit-in thermal protector for single phase motor>> Motor with copper winding>> Motor Housing: Steel-plate, Aluminum alloy>> C&U bearing>> AISI 304 shaft or 45# carbon steelWorking Range>> Liquid: clean liquids without suspended solids, non-aggressive>> Liquid temperature: -10ºC and +100ºC>> Ambient temperature up to +40ºC>> Max. working pressure 10 bar>> Continous service S1>> Insulation: B>> Protection: IP44brApplication>> Household Water Supply>> Water Supply System>> Cooling System>> Boost SystemAdvantages>> Electronic pressure switch controlled by PC clip to avoid take off pressure switch frequently.>> Every 72h it will start for 10s in order to avoid pump locked if long time no using pump.>> Water protection system to avoid the pump in the anhydrous state for a long time. >> Delay 3s start to avoid spark-over socket, protect the personal safety.>> The flow priority system, electric pump use acme, turely achieve the full pressure. brZCM INTELLIGENT WATER PUMPS FOR COLD AND HOT WATER1. Self-priming: For the first time using, the entire pump chamber should be filled with water. 2. Automatic: It is powered on or off by automatic system: turn on the tap the pump works, and turn off the tap the pump stop working. 3. Booster: Stable and powerful pressure is controlled by pressure sensor and flow sensor. Besides, thermal protector in motor will interrupt current when motor overheats.br>

=1000USD, 30% T/T in advance ,balance before shippment./p>